API AUDIO 512v 500-Series Mic/Line/Instrument Preamp and DI Module

El precio original era: $3.545.699.El precio actual es: $2.972.599.

Up to 65 dB of Clean Gain
Variable Output Level Control
3:1 Output Transformer Tap Selection
Front and Back Panel Mic Inputs

Ideal as a front end in studios for recording a wide range of input sources, the API Audio 512v is a mic/line/instrument preamp module designed for 500-series racks. Sporting up to 65 dB of mic gain (45 dB of instrument gain) and a front-panel XLR-1/4″ combo input jack, as well as rear panel mic input support, this module provides low-noise input for any signal. Output level control is variable, allowing for smooth and fine adjustment. There is 48V phantom power available for condensers and other active mics. When the 3:1 output transformer tap is engaged, the output gain ratio is reduced to 1:1. When taking in excessively hot signals, such as those already boosted by a preamp, a -20 dB pad is available. You can also engage a polarity flip switch. An LED VU meter lets you keep an eye on your signal levels. With discrete circuitry and the signature 2520 op-amp, this preamp module offers an excellent front-end sound, with warmth and reliability.

Bajo Pedido - Disponible para reserva - Llega en aproximadamente 15 a 20 días hábiles

Valor por transferencia (Precio en Rojo) - Débito/Crédito (6 cuotas s/interés): Precio tachado

6 Cuotas fijas de $629.200

3 Cuotas fijas de $1.149.405

Abonando en efectivo en nuestras oficinas te queda en $2.794.199 o USD1.879.

SKU: BHAP512V Categorías: All Analog Studio Hardware, Micrófonos, Microphone Preamps, Pro Audio, Studio Recording Etiquetas: 3:1 Output Transformer Tap Selection, 45 dB of Gain for Line/Instrument Preamp, API AUDIO, Up to 65 dB of Clean Gain, Variable Output Level Control

Descripción

The Rock Store te trae API AUDIO 512v 500-Series Mic/Line/Instrument Preamp and DI Module

Sus características técnicas principales son:

Ideal as a front end in studios for recording a wide range of input sources, the API Audio 512v is a mic/line/instrument preamp module designed for 500-series racks. Sporting up to 65 dB of mic gain (45 dB of instrument gain) and a front-panel XLR-1/4″ combo input jack, as well as rear panel mic input support, this module provides low-noise input for any signal.

Output level control is variable, allowing for smooth and fine adjustment. There is 48V phantom power available for condensers and other active mics. When the 3:1 output transformer tap is engaged, the output gain ratio is reduced to 1:1. When taking in excessively hot signals, such as those already boosted by a preamp, a -20 dB pad is available. You can also engage a polarity flip switch. An LED VU meter lets you keep an eye on your signal levels. With discrete circuitry and the signature 2520 op-amp, this preamp module offers an excellent front-end sound, with warmth and reliability.

Fully Discrete Design

The API 512v remains faithful to the circuit designs of API’s founder Saul Walker. Artfully combining those circuits with API’s proprietary transformers and the excellent 2520 op-amp, the 512v is a highly musical and rich-sounding analog mic pre, equally at home in commercial recording spaces as it is in smaller home studios. Fully featured and still hand assembled, the 512v exhibits the reliability, long life, and uniformity which are characteristic of all API products.

Aviso: Las especificaciones y disponibilidad pueden cambiar sin previo aviso.

Información adicional

Peso	0,8754 kg
Dimensiones	26,162 × 16,002 × 12,446 cm
Peso	1.41 lb / 0.64 kg
Ganar control	Mic: 34 to 65 dB Hi-Z: 14 to 42 dB
Nivel máximo de entrada	Mic: -4 dBu Hi-Z: +36 dBu
Impedancia de salida	<75 Ohms (Transformer Balanced)
Impedancia de entrada	Mic: 1.5 Kilohms Hi-Z: 400 Kilohms
Respuesta de frecuencia	20 Hz to 50 kHz
Relación señal-ruido	120 dB
E/S de audio	1x Combo XLR-1/4″ 3-Pin Hi-Z/Instrument/Line/Mic Input (Front Panel)
Fuente de energía	Proprietary Interface
Alimentación de entrada CC	16 VDC
Corriente de funcionamiento	90 mA
Montaje	Front: 2x 500-Series Rack Screw
Color	Negro
Material de construcción	Metal
Dimensiones	7 x 5.25 x 1.5″ / 17.8 x 13.34 x 3.8 cm